Nonlinear Regression (Archontoulis and Miguez) paper

Fernando Miguez

2020-04-24

Introduction

The nlraa is distributed as part of publications that illustrates the fit of nonlinear regression models.

Example

We start by looking at biomass accumulation data from an experiment conducted in Greece by Danalatos and Archontoulis.

## 'data.frame':    236 obs. of  5 variables:
##  $ DOY  : int  141 141 141 141 141 141 141 141 141 141 ...
##  $ Block: int  1 2 3 4 1 2 3 4 1 2 ...
##  $ Input: int  2 2 2 2 1 1 1 1 2 2 ...
##  $ Crop : Factor w/ 3 levels "F","M","S": 2 2 2 2 2 2 2 2 3 3 ...
##  $ Yield: num  0 0 0 0 0 0 0 0 0 0 ...
##   DOY Block Input Crop Yield
## 1 141     1     2    M     0
## 2 141     2     2    M     0
## 3 141     3     2    M     0
## 4 141     4     2    M     0
## 5 141     1     1    M     0
## 6 141     2     1    M     0

The data represents Yield as harvested biomass for three crops: maize (M), fiber sorghum (F) and sweet sorghum (S).

Before starting with the model fit we need to manipulate the data by creating an index which describes the experimental unit (eu). We also delete the DOY 141 when crops where planted.

The next step is to create the groupedData which is a convenient structre to be used throughout the fitting process in nlme.

Originally, Danalatos et al. (2009) fitted the beta growth function as described by Yin et al. (2003). In nlraa we provide the selfStart function SSbgf to improve the fitting process.

## Warning: 4 times caught the same error in nls(model, data = data, control =
## controlvals): singular gradient

There are three crops, two levels of agronomic input and four blocks which results in 24 possible combinations. We fitted the model to these 24 experimental units and obtained apparent convergence in 20 (Note: was only 10 in the original paper, but this improved dramatically when I recomputed the partial derivatives 2020/1/3). Still, this suggests that some modifications are needed.

From the residuals plot we see some evidence of the inadequacy of the model. In particular the model over predicts at low values. We relax the convergence criteria to achieve a fitted model.

## Warning in (function (model, data = sys.frame(sys.parent()), fixed,
## random, : Iteration 1, LME step: nlminb() did not converge (code = 1). PORT
## message: function evaluation limit reached without convergence (9)

Despite the message, we do obtain a ‘partially’ fitted model.

A modified beta growth function proposed by Yin et. al (2003) – included in the errata – allows for a delayed start of growth by modifying the \(t_b\) parameter.

\[ y = w_b + (w_{max} - w_b) \left (1 + \frac{t_e - t}{t_e - t_m} \right ) \left (\frac{t - t_b}{t_e - t_b} \right )^\frac{t_e - t_b}{t_e - t_m} \]

\[ t_b < t_m < t_e \]

We include this as bgf2 but not the selfStart version at this point. We also fix the \(w_b\) and the \(t_b\) parameters, so they are not part of the fitting process. There are good reasons for this: We know the initial biomass is minimal (seed weight) and we know the day of planting (it does not need to be optimized).

The previous figure shows a much lower bias at lower values.

We proceed to fit the non-linear mixed model and then we simplify the variance-covariance random effects structure.

## Warning in (function (model, data = sys.frame(sys.parent()), fixed,
## random, : Iteration 2, LME step: nlminb() did not converge (code = 1). Do
## increase 'msMaxIter'!
##          Model df      AIC      BIC    logLik   Test L.Ratio p-value
## fit.me2      1 10 1167.755 1201.321 -573.8776                       
## fit2.me2     2  7 1176.156 1199.652 -581.0778 1 vs 2 14.4005  0.0024

Some of the covariances might be significant, but we’ll look at this later. We will next include the effects of Crop type and Input in the fixed part of the model. We want to know how the parameters are affected by the treatment effects.

The current model displays some evidence of unequal variance as shown in the figure. The amount of dispersion around zero is smaller for low fitted values and the amount for large fitted values is larger.

We fit two models one where the variance depends on the Crop (since visually the crops are so different) and another one where it does not depend on the Crop.

##          Model df      AIC      BIC    logLik   Test  L.Ratio p-value
## fit6.me2     1 25 934.4841 1018.399 -442.2421                        
## fit7.me2     2 23 940.5031 1017.705 -447.2515 1 vs 2 10.01896  0.0067

Model fit6.me2 is better according to the AIC criteria and the likelihood ratio test.

## Nonlinear mixed-effects model fit by maximum likelihood
##   Model: Yield ~ bgf2(DOY, w.max, w.b = 0, t.e, t.m, t.b = 141) 
##   Data: smG 
##   Log-likelihood: -442.2421
##   Fixed: list(w.max + t.e + t.m ~ Crop + Input + Crop:Input) 
## w.max.(Intercept)       w.max.CropM       w.max.CropS       w.max.Input 
##       25.11412916      -15.54706290       -0.52866922        6.75566292 
## w.max.CropM:Input w.max.CropS:Input   t.e.(Intercept)         t.e.CropM 
##       -0.93045591        2.53649218      281.72491240      -32.06305493 
##         t.e.CropS         t.e.Input   t.e.CropM:Input   t.e.CropS:Input 
##       -2.32139906       -2.25004788        1.43274775        1.84876034 
##   t.m.(Intercept)         t.m.CropM         t.m.CropS         t.m.Input 
##      237.08075639      -18.66441619        3.57254819       -1.26661254 
##   t.m.CropM:Input   t.m.CropS:Input 
##       -0.09073866        0.66439732 
## 
## Random effects:
##  Formula: list(w.max ~ 1, t.e ~ 1, t.m ~ 1)
##  Level: eu
##  Structure: Diagonal
##         w.max.(Intercept) t.e.(Intercept) t.m.(Intercept)  Residual
## StdDev:      1.928088e-10    0.0004660137    2.886024e-09 0.3479011
## 
## Variance function:
##  Structure: Power of variance covariate, different strata
##  Formula: ~fitted(.) | Crop 
##  Parameter estimates:
##         M         F         S 
## 0.7027785 0.8586334 0.8960396 
## Number of Observations: 212
## Number of Groups: 24

Since random effects are almost zero. We remove them from the model and use the gnls function which is specifically written for models without random effects.

##          Model df      AIC      BIC    logLik   Test     L.Ratio p-value
## fit6.me2     1 25 934.4841 1018.399 -442.2421                           
## fit8.me2     2 22 928.4834 1002.328 -442.2417 1 vs 2 0.000681815       1

Model fit8.me2 is better than fit6.me2 according to AIC and BIC.

## Denom. DF: 194 
##                   numDF   F-value p-value
## w.max.(Intercept)     1  12677.85  <.0001
## w.max.Crop            2    985.63  <.0001
## w.max.Input           1    482.00  <.0001
## w.max.Crop:Input      2     36.67  <.0001
## t.e.(Intercept)       1  26077.39  <.0001
## t.e.Crop              2     97.90  <.0001
## t.e.Input             1     35.98  <.0001
## t.e.Crop:Input        2     64.25  <.0001
## t.m.(Intercept)       1 139814.54  <.0001
## t.m.Crop              2    151.45  <.0001
## t.m.Input             1      0.77  0.3808
## t.m.Crop:Input        2      0.04  0.9636

This shows that the Crop, Input and interaction are significant for all terms except for the t.m parameter.

Residuals look good with much less overprediction at lower values. The autocorrelation does not appear to be a concern (not shown).

We finalize the fitting exercise by plotting observed and predicted values.